Netgear GSM7328Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 28

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3 Table 1-1. Quick Start Commands (continued) Command Mode copy nvram:startup- Privileged config copy nvram:errorlog Privileged copy nvram:traplog Privileged copy nvram:startup-config copy system:image copy nvram:startup-config copy system:image clear config Privileged EXEC Description Starts the configuration file upload, displays the mode and type of upload and confirms the upload is progressing. The URL must be specified as: xmodem:/ For example: If the user is using HyperTerminal, the user must specify where the file is going to be received by the PC. Starts the error log upload, displays the mode and type of upload and confirms the upload is progressing. The URL must be specified as: xmodem:/ Starts the trap log upload, displays the mode and type of upload and confirms the upload is progressing. The URL must be specified as: xmodem:/ Sets the destination (download) datatype to be an image (system:image) or a configuration file (nvram:startup-config). The URL must be specified as: xmodem:/ For example: If the user is using Hyper Terminal, the user must specify which file is to be sent to the networking device. The Networking Device restarts automatically once the code has been downloaded. Sets the destination (download) datatype to be an image (system:image) or a configuration file (nvram:startup-config). The URL must be specified as: xmodem:/ Sets the destination (download) datatype to be a configuration file. The URL must be specified as: tftp://// Before starting a TFTP server download, you must configure the IP address. Sets the destination (download) datatype to be an image. The URL must be specified as: tftp://// The system:image option downloads the code file. Enter yes when the prompt asks if you want to clear all the configurations made to the networking device. 1-8 Getting Started v1.0, November 2008