Netgear GSM7328Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 33

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3 Assigning Switch Name and Location Information Ezconfig will proceed to the next step in the setup: Do you want to assign switch name and location information (Y/N/Q)? System Name: Alpha1-1 System Location: Bld1 System Contact: James There are changes detected, do you wish to save the changes permanently (Y/N)? Note: The System Name, System Location and System Contact fields accept only alphanumeric characters, characters like "#$..." are not supported. The maximum length of the value cannot be longer than 31 bytes. Saving the Configuration After the name and location values are entered, Ezconfig will ask if you would like to have the changes be saved into the Flash (permanently storage). Enter Y to save the configuration. There are changes detected, do you wish to save the changes permanently (Y/N)? y The configuration changes have been saved successfully. Please enter 'show running-config' to see the final configuration. Thanks for using EzConfig! If during the session, the switch loses its power, the setup information will be lost if Ezconfig does not have the chance to save the changes before power-down. Using Ezconfig for Switch Setup 2-3 v1.0, November 2008