Netgear M5300-28G3 Hardware Installation Guide - Page 26

NETGEAR Managed Stackable Switch M5300 Series Table 4. M5300 Series technical specifications (continued) System Service Stacking Addressing MAC Address entries Performance Interface • DHCP, BOOTP Relay • DHCP Server • Maximum of 8 switches in a single stack • RING Topology support • CHAIN Topology support 48-Bit MAC address 32K MAC addresses per system • Forwarding Modes: Store-and-Forward • Network latency: - 3.782 μs for 64-byte frames for 1000 Mbps to 1000 Mbps transmission - 8.415 μs for 64-byte frames for 10G to 10G transmission M5300-28G/M5300-28G3/M5300-28G-PoE+ • 24 RJ-45 port for 10/100/1000M • 24 PoE+ port (M5300-28G-PoE+ only) • 4 SFP/RJ45 combo port for 100M/1000M • 2 SFP+/RJ45 combo port for 1G/10G • 1 power module slot • 2 IO module bays • 1 USB host port • 1 DB9 console port • 1 mini-USB console port M5300-52G/M5300-52G3/M5300-52G-PoE+ • 48 RJ-45 port for 10/100/1000M • 48 PoE+ port (M5300-52G-PoE+ only) • 4 SFP/RJ45 combo port for 100M/1000M • 2 SFP+/RJ45 combo port for 1G/10G • 1 power module slot • 2 IO module bays • 1 USB host port • 1 DB9 console port • 1 mini-USB console port M5300-28GF3 • 24 SFP port for 10/100/1000M • 4 SFP/RJ45 combo port for 100M/1000M • 2 SFP+/RJ45 combo port for 1G/10G • 1 power module slot • 2 IO module bays • 1 USB host port • 1 DB9 console port • 1 mini-USB console port Technical Specifications 26