Netgear M5300-52G Command Line Interface (CLI) User Manual - Page 233

ProSafe Managed Switch no mvr This command disables MVR. Format Mode no mvr Global Config Interface Config mvr group This command adds an MVR membership group. is the IP multicast group being added. The count is the number of incremental multicast groups being added (the first multicast group is A.B.C.D). If a count is not specified, then only one multicast group is added. Format Mode mvr group [count] Global Config no mvr group This command removes the MVR membership group. Format Mode no mvr group [count] Global Config mvr mode This command changes the MVR mode type. If the mode is set to compatible, then the switch does not learn multicast groups; they need to be configured by the operator as the protocol does not forward joins from the hosts to the router. To operate in this mode, the IGMP router needs to be statically configured to transmit all required multicast streams to the MVR switch. If the mode is set to dynamic, then the switch learns existing multicast groups by snooping the IGMP queries from router on source ports and forwarding the IGMP joins from the hosts to the IGMP router on the multicast VLAN (with appropriate translation of the VLAN ID). Format Mode Default mvr mode { compatible |dynamic } Global Config compatible Multicast VLAN Registration (MVR) 233