Netgear M5300-52G Command Line Interface (CLI) User Manual - Page 512
iSCSI Commands, show auto-voip oui-table
View all Netgear M5300-52G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 512 highlights
ProSafe Managed Switch show auto-voip oui-table This command lists all of the configured OUIs. Format Mode show auto-voip oui-table • Privileged EXEC • User EXEC Term OUI Status OUI Description Definition OUI of the source MAC address Default or Configured entry. Description of the OUI Example: show auto-voip oui-table OUI --------00:01:E3 00:03:6B 00:01:01 Status ---------Default Default Configured Description --------SIEMENS CISCO1 VoIP phone iSCSI Commands The tasks involved in providing automated QoS preferential treatment of iSCSI flows can be divided into the following categories: • Detecting the establishment and termination of iSCSI sessions and connections by snooping packets used in the iSCSI protocol. • Maintaining a database of currently active iSCSI sessions and connections to store data about the participants. This allows the formulation of classifier rules giving the data packets for the session the desired QoS treatment. • Installing and removing classifier rule sets as needed for the iSCSI session traffic. • Monitoring activity in the iSCSI sessions to allow for aging out session entries if the session termination packets are not received. The means of detecting the establishment and termination of iSCSI sessions is accomplished by installing classifier rules to trap iSCSI protocol packets to the CPU for examination. This protocol uses well-known TCP ports for initiators to contact targets with 3260 and 860. Additional port numbers or "port number/target IP address" can also be configured for monitoring if an installation uses ports other than the well-known ports. The well-known ports are configured as part of the default configuration of the component and can be removed if desired by the user. Quality of Service (QoS) Commands 512