Netgear PS121v1 PS121v1 User Manual - Page 22
No lights are lit on the mini print server, Printing Errors, The printer is printing \ - driver for windows 7
View all Netgear PS121v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
User Manual for the NETGEAR PS121 Mini Print Server • Make sure the power adapter is connected to a functioning power outlet. If it is in a power strip, make sure the power strip is turned on. If it is plugged directly into the wall, verify that it is not a switched outlet. • Make sure you are using the correct NETGEAR power adapter supplied with your mini print server. No lights are lit on the mini print server It takes a few seconds for the status light to be lit. Wait a minute and check the status light on the mini print server. Printing Errors The printer is printing "garbage" characters If the printer does not match the printer driver in the operating system, then run the Add Printer Wizard. Windows error message appears when printing Consult Windows help. The print server is not found Make sure you can access other places from your computer. If you cannot, then troubleshoot your computer or Internet connectivity. If you are running a software firewall, disable it. This includes the Windows XP firewall - which may have been turned on during Windows upgrade or installation without you being aware of it. Nothing is printing • Try printing from another computer. If this is successful, then there is a problem with your computer configuration, not the print server. Consult the computer and operating system documentation. 4-2 Troubleshooting