Netgear RN204 Hardware Manual - Page 41
Table 4., ReadyNAS 204 indicator descriptions
View all Netgear RN204 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
ReadyNAS OS 6 Desktop Storage Systems Status Information You can obtain information about the status of your storage system by reviewing the indicators listed in the following table. Table 4. ReadyNAS 204 indicator descriptions Indicator Power button and LED Disk LEDs (1, 2, 3, 4) Disk activity LED Rear panel Ethernet port LEDs Status display screen Description Press this button to turn on the ReadyNAS. The LED has these states: • On. Powered on. • Blinking. Booting or shutting down. • Off. Powered off. Each drive bay has an LED associated with it, in numerical order from left to right, along the top of the front panel of the storage system. The disk LEDs have these states: • On. Power is on and the disk is operating normally. • Blinking. The disk was removed, failed, or is resynchronizing. See the display screen for details. • Off. The drive bay is empty. The disk activity LED has these states: • Blinking. A disk is being accessed. • Off. All disks are idle. Two LED status indicators are built into each port, one off or green and one showing three states: off, amber, or green. They indicate port speed and activity as follows: • Green, green. 1000 Mbps connection speed, no activity. • Green blinking, green. 1000 Mbps connection speed, activity. • Green, amber. 100 Mbps connection speed, no activity. • Green blinking, amber. 100 Mbps connection speed, activity. • Green on, off. 10 Mbps connection speed, no activity. • Green blinking, off. 10 Mbps connection speed, activity. • Off, off. No connection. Displays messages about the status of your storage system. Note that the status display screen goes to sleep to prevent burn-in. To wake it, press the Power button once. If the storage system reports an abnormal operation or error, the status display screen stays on. NETGEAR ReadyNAS 204 41