Netgear RN316 Hardware Manual - Page 160
Table 19. EDA 500 indicator descriptions, NETGEAR EDA 500, ReadyNAS OS 6 Desktop Storage Systems
![]() |
View all Netgear RN316 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
ReadyNAS OS 6 Desktop Storage Systems Table 19. EDA 500 indicator descriptions Indicator Power LED eSATA LED Volume LED Alert LED Disk LEDs Description The Power LED indicates these states: • On. Powered on. • Off. Powered off. The eSATA LED indicates these states: • On. The SATA link is established between the EDA 500 and a host. • Off. The SATA link is not established. The Volume LED indicates these states: • On. The data volume or volumes are mounted by a host. • Off. The data volume or volumes are not mounted. You can safely disconnect the eSATA cable. The Alert LED indicates these states: • On. The system needs attention. Use the local admin page to determine the problem. For more information, see the ReadyNAS OS 6 Software Manual, which is available at netgear.com/support/product/ReadyNAS_OS_6. • Off. The system is healthy. A disk LED next to each active drive bay indicates the status of the disk inside. (The cold spare drive bay has no LED.) The disk LEDs indicate these states: • Solid blue. Power is on and the disk is operating normally. • Blinking blue. The disk is active. • Solid red. The disk was removed, failed, or is resynchronizing. See the display screen for details. • Off. No disk is present. Power On and Shut Down This section describes how to power on and shut down your system. If you must shut down the system, use the preferred shutdown method whenever possible. Power On When the system is connected to a power supply and the Power switch is in the On position, the system automatically powers on. NETGEAR EDA 500 160
![](/manual_guide/products/netgear-rn628x-hardware-manual-2456228/160.png)