Netgear RN316 Hardware Manual - Page 19

ReadyNAS OS 6 Desktop Storage Systems Table 1. ReadyNAS 102 indicator descriptions Indicator Description Power button and LED Press this button to turn on the ReadyNAS. The LED indicates these states: • On. Powered on. • Blinking. Booting or shutting down. • Off. Powered off. Disk LEDs (1, 2) An LED on the front panel of the storage system is associated with each drive bay. The disk LEDs have these states: • On. Power is on and the disk is operating normally. • Blinking. The disk was removed, failed, or is resynchronizing. • Off. The drive bay is empty. Disk activity LED The disk activity LED has these states: • On. At least one disk is present. • Blinking. A disk is active. • Off. All disks are idle. Rear panel Ethernet port Two LED status indicators are built into this port, one green and one amber. They LEDs indicate port speed and activity as follows: • Green on, amber off. 1000 Mbps connection speed, no activity. • Green blinking, amber off. 1000 Mbps connection speed, activity. • Green off, amber on. 10 Mbps or 100 Mbps connection speed, no activity. • Green off, amber blinking. 10 Mbps or 100 Mbps connection speed, activity. • Green off, amber off. No connection. Power On and Shut Down This section describes how to power on and shut down your system. If you must shut down the system, use one of the preferred shutdown methods whenever possible. NETGEAR ReadyNAS 102 19