Netgear RN51600 Software Manual - Page 177
System Settings, ReadyNAS OS 6.1
View all Netgear RN51600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
ReadyNAS OS 6.1 3. From the pop-up menu that displays, select Settings. A pop-up screen displays the settings for the selected Ethernet interface. 4. On the General tab, configure the settings as explained in the following table: Item Description Name Cannot be edited. Displays the name of the Ethernet interface. Bandwidth (Mbps) Cannot be edited. Displays the bandwidth of the Ethernet interface. MTU VLAN ID Enter the MTU in bytes. The default setting is 1500 bytes. Enter a VLAN ID. The default setting ID is 0. Note: If you use VLAN IDs, the switch to which you connect the ReadyNAS system needs to support VLAN tagging. System Settings 177
System Settings
177
ReadyNAS OS 6.1
3.
From the pop-up menu that displays, select
Settings
.
A pop-up screen displays the settings for the selected Ethernet interface.
4.
On the General tab, configure the settings as explained in the following table:
Item
Description
Name
Cannot be edited. Displays the name of the Ethernet interface.
Bandwidth (Mbps)
Cannot be edited. Displays the bandwidth of the Ethernet interface.
MTU
Enter the MTU in bytes. The default setting is 1500 bytes.
VLAN ID
Enter a VLAN ID. The default setting ID is 0.
Note:
If you use VLAN IDs, the switch to which you connect the ReadyNAS system
needs to support VLAN tagging.