Netgear RN628X00 Hardware Manual - Page 163
Disk Trays, Standard Disk Tray
View all Netgear RN628X00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
ReadyNAS OS 6 Desktop Storage Systems Disk Trays All systems except the EDA 500 use standard disk trays. The EDA 500 comes with its own special disk trays. This section describes both the standard and EDA 500 disk trays. Note For some disks, first remove the plastic mounting bracket from the disk tray before you mount the disk to the disk tray. After you mount the disk to the disk tray, use the screws to secure the disk to the disk tray. Standard Disk Tray The following figure shows the features of the standard disk tray. This disk tray is used in all systems except the EDA 500. For information about the EDA 500 disk tray, see EDA 500 Disk Tray on page 164. Figure 62. Standard disk tray 1. Disk tray 2. Disk tray release latch 3. Recessed disk tray handle lock 4. Disk tray handle 5. Disk screw holes 6. Mounting bracket 7. Bracket lock IMPORTANT: To maintain adequate airflow, make sure that all disk trays remain in the drive bays, even if no disk is installed in the tray. Do not use standard disk trays with the EDA 500. Use only EDA 500 disk trays with the EDA 500. Disks 163