Netgear WAG302v1 WAG302v1 Reference Manual - Page 46
SSID and WEP/WPA Settings Setup Form, NETGEAR_11a, Authentication, WEP Encryption Keys.
View all Netgear WAG302v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g) SSID and WEP/WPA Settings Setup Form 802.11a Configuration For a new wireless network, print or copy this form and fill in the configuration parameters. For an existing wireless network, the person who set up or is responsible for the network will be able to provide this information. Be sure to set the Regulatory Domain correctly as the first step. • SSID: The Service Set Identification (SSID) identifies the wireless local area network. NETGEAR_11a is the default WAG302 SSID. However, you may customize it by using up to 32 alphanumeric characters. Write your customized SSID on the line below Note: The SSID in the wireless access point is the SSID you configure in the wireless adapter card. All wireless nodes in the same network must be configured with the same SSID: • Authentication: Circle one: Open System or Shared Key. (Choose Shared Key for more security.) Note: If you select shared key, the other devices in the network will not connect unless they are set to Shared Key as well and have the same keys in the same positions as those in the WAG302. • WEP Encryption Keys. Circle one: 64, 128, or 152 bits. (Enter all four 802.11a keys for the Key Size chosen.) Key 1 Key 2 Key 3 Key 4 WPA-PSK (Preshared Key) Record the WPA-PSK key. Key WPA RADIUS Settings. For WPA, record the following settings for the primary and secondary RADIUS servers: Server Name/IP Address: Primary Secondary Port Shared Secret 2-22 v2.0, May 2006 Basic Installation and Configuration