Netgear WAG302v1 WAG302v1 Reference Manual - Page 58
Network Authentication, WPA-PSK, Encryption, Wireless Client Security Separation, Apply
View all Netgear WAG302v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g) To configure WPA-PSK: 1. From the Network Authentication drop-down menu, select WPA-PSK. By default, Data Encryption will be set to TKIP. 2. Enter the preshared key passphrase (Network Key). 3. Wireless Client Security Separation is disabled by default. If enabled, associated wireless clients will not be able to communicate with each other. (This feature is intended for hotspots and other public access situations. 4. Click Apply to save your settings. Configuring WPA2-PSK Not all wireless adapters support WPA2. Furthermore, client software is required on the client. Make sure your client card supports WPA2. Consult the product document for your wireless adapter and WPA2 client software for instructions on configuring WPA2 settings. Figure 2-21 To configure WPA2-PSK: 1. From the Network Authentication drop-down menu, select WPA2-PSK from the list. By default, Data Encryption will be set to AES. 2. Enter the preshared key passphrase (Network Key). 2-34 v2.0, May 2006 Basic Installation and Configuration