Netgear WG602 WG602v3 User Manual - Page 34
How to Con WEP Wireless Security
![]() |
UPC - 606449030730
View all Netgear WG602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Reference Manual for the NETGEAR 54 Mbps Wireless Access Point WG602v3 Use the procedures described in the following sections to configure the WG602v3. Store this information in a safe place. How to Configure WEP Wireless Security Note: If you use a wireless PC to configure WEP settings, you will be disconnected when you click Apply. Reconfigure your wireless adapter to match the new settings or access the wireless access point from a wired PC to make any further changes. To configure WEP data encryption, follow these steps: 1. Click the Security Settings link in the Setup section of the main menu and select WEP for the Security Type. Figure 3-11: WEP Settings page 2. The Authentication Type is set to Any by default. Change the Authentication Type to Shared Key to use WEP data encryption. 3. For the Encryption Strength, select 64- or 128-bit encryption. 4. You can manually or automatically program the four data encryption keys. These values must be identical on all PCs and access points in your network. 3-16 Basic Installation and Configuration 202-10060-02, February 2005
![](/manual_guide/products/netgear-wg602-wg602v3-user-manual-1-df93131/34.png)