Netgear WGR614v10 WGR614v10 Setup Manual - Page 18
adapter outlet of your wireless router - review
View all Netgear WGR614v10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
7. Connect any additional wired computer to your router by inserting an Ethernet cable from one of these computers into one of the three remaining LAN ports. 8. Review that your network is now set up (as shown in Figure 9); you are ready to start your network. Figure 9 9. Start your network in the correct sequence, as described below. Failure to start or restart your network in the correct sequence could prevent you from accessing the Internet. To start your network: 1. Plug in and turn on the cable or DSL modem. Wait 2 minutes. 2. Plug the end of the power adapter's cord into the wall or a power strip, and into the power adapter outlet of your wireless router (F), as shown in Figure 10. Wait 1 minute. Figure 10 Manually Installing Your Router F 14