Netgear WMS5316-Wireless Reference Manual - Page 11
DHCP Server Settings, untagged VLAN, System >, Basic > DHCP Server Settings, Use VLAN Interface
View all Netgear WMS5316-Wireless manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ProSafe 16 AP Wireless Management System WMS5316 Note: The untagged VLAN check box should be cleared only if the hubs or switches on your LAN support the VLAN (802.1Q) standard. Likewise, the untagged VLAN value should be changed only if the hubs and switches on your LAN support the VLAN (802.1Q) standard. Changing either of these values will result in a loss of IP connectivity if the hubs and switches on your network have not yet been configured with the corresponding VLANs. Management VLANs are used for managing traffic (Telnet, SNMP, and HTTP) to and from the wireless management system and managed access points. Frames belonging to the management VLAN are not given any 802.1Q header when sent over the trunk. If a port is in a single VLAN, it can be untagged. But if the port needs to be a member of multiple VLANs, it needs to be tagged. DHCP Server Settings The wireless management system can function as a DHCP server. Multiple DHCP server pools can be added for different VLANs. Click the Configuration tab and select System > Basic > DHCP Server Settings to display the following screen: This screen lets you to enable and configure the DHCP server. You can specify the following information: • Use VLAN Interface: Select this check box to enable the wireless management system to provide IP addresses to clients in a specified VLAN. Note: Selecting the Use VLAN Interface check box allows you to access the VLAN IP Address and Subnet Mask fields. Select this option if the DHCP pool being added is only for a particular VLAN. Getting Started 11