Netgear WN1000RP User Manual - Page 6
Hardware Features, Link Rate, Status, PC to Booster, On/Off button, WPS button - help
View all Netgear WN1000RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
WiFi Booster for Mobile WN1000RP The booster LEDs can help you tell if the booster is correctly set up and working as it should. • The best performance is delivered when the Link Rate LED LED are green. and the PC to Booster • A workable performance is delivered when the Link Rate LED is amber and the PC to Booster LED is green. Hardware Features The following figure shows the booster. Link Rate Status PC to Booster On/Off button WPS button Figure 2. Booster Factory Reset button The LEDs on the front show how the booster is working: • Link Rate. This LED indicates a wireless connection between the booster and the router. Green is best. Amber is good. Red is poor. • Status. This LED is lit when the booster is powered on. • PC to Booster. The LED is lit when the booster is connected to a computer. The side panel has the following features: • On/Off button. Turns the device on and off. • WPS button. Press the WPS button to wirelessly connect the booster to your router or wireless adapter. Getting Started 6