Netgear WN604 WN604 Reference Manual - Page 70
Maintenance, Upgrade, Firmware, Browse, Apply, Warning
UPC - 606449070712
View all Netgear WN604 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
NETGEAR Wireless N150 Access Point WN604 Reference Manual You cannot perform the software upgrade from a computer that is connected to the WN604 Wireless Access Point with a wireless link. You must use a computer that is connected to the WN604 Wireless Access Point with a Ethernet cable. Warning: When uploading software to the WN604 Wireless Access Point, it is important not to interrupt the Web browser by closing the window, clicking a link, or loading a new page. If the browser is interrupted, the upload may fail, corrupt the software, and render the WN604 completely inoperable. . Figure 4-1 Firmware upgrade screen To upgrade the WN604 firmware: 1. Download the new software file from the NETGEAR website, save it to your hard disk. 2. Under the Maintenance tab, select Upgrade from the main menu, and then select Firmware Upgrade. The Firmware Upgrade screen displays as shown in Figure 4-1 above. 3. Click Browse and browse to the location of the upgrade file. 4. Click Apply. When the upload completes, your wireless access point will automatically restart. The upgrade process typically takes about 2 minutes. 4-2 Management v1.0, March 2010