Netgear WNAP210 WNAP210 Reference Manual - Page 57
Configuring WPA2 with RADIUS, Wireless Client Security Separation
UPC - 606449062694
View all Netgear WNAP210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
ProSafe Wireless-N Access Point WNAP210 Reference Manual Configuring WPA2 with RADIUS Not all wireless adapters support WPA2. Furthermore, client software is required on the client. Make sure your client card supports WPA2. Consult the product document for your wireless adapter and WPA2 client software for instructions on configuring WPA2 settings. Figure 2-18 To configure WPA2 with RADIUS: 1. Select Configuration > Security >Advanced > RADIUS Server Settings. The RADIUS Server Settings screen displays. 2. Enter the RADIUS settings as shown in "Configuring the RADIUS Server Settings" on page 2-27. 3. Click Apply to save your RADIUS settings. 4. Select Security Profile Settings. The screen for the profile settings you selected will display. When the Security Profile screen displays, select the radio button of the security profile you want to modify, and click Edit. 5. From the Network Authentication drop-down list, select WPA2 with RADIUS from the list. By default, Data Encryption will be set to AES. 6. Wireless Client Security Separation is set to No (disabled) by default. If this feature is enabled, associated wireless clients will not be able to communicate with each other. (This feature is intended for hotspots and other public access situations.) 7. Click Apply to save your settings. Installation and Configuration v1.0 March 2009 2-35