Netgear WNAP210 WNAP210 Reference Manual - Page 60
Configuring WPA2-PSK
UPC - 606449062694
View all Netgear WNAP210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
ProSafe Wireless-N Access Point WNAP210 Reference Manual To configure WPA-PSK: 1. From the Network Authentication drop-down list, select WPA-PSK. By default, Data Encryption will be set to TKIP. 2. Enter the preshared key passphrase (network key). 3. Wireless Client Security Separation is set to No (disabled) by default. If this feature is enabled, associated wireless clients will not be able to communicate with each other. (This feature is intended for hotspots and other public access situations.) 4. Click Apply to save your settings. Configuring WPA2-PSK Not all wireless adapters support WPA2. Furthermore, client software is required on the client. Make sure your client card supports WPA2. Consult the product document for your wireless adapter and WPA2 client software for instructions on configuring WPA2 settings. Figure 2-21 To configure WPA2-PSK: 1. From the Network Authentication drop-down list, select WPA2-PSK.. By default, Data Encryption is set to AES. 2. Enter the preshared key passphrase (network key). 2-38 v1.0 March 2009 Installation and Configuration