Netgear WNDR3400v2 WNDR3400 User Manual - Page 82
Static Routes, Route Name, Private, Active, Type the destination IP address of the final destination. - static ip
View all Netgear WNDR3400v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
N600 Wireless Dual Band Router WNDR3400 User Manual Select Static Routes under Advanced in the main menu. The Static Routes screen displays. Figure 5-4 To add or edit a static route: 1. Click Add to open the Static Routes screen. Figure 5-5 2. In the Route Name field, type a name for this static route. (This is for identification purposes only.) 3. Select the Private check box if you want to limit access to the LAN only. If Private is selected, the static route is not reported in RIP. 4. Select the Active check box to make this route effective. 5. Type the destination IP address of the final destination. 6. Type the IP subnet mask for this destination. If the destination is a single host, type 255.255.255.255. 7. Type the gateway IP address, which must be a router on the same LAN segment as the WNDR3400 router. Customizing Your Network Settings v1.0, August 2010 5-10