Netgear WNR2200 N300 Wireless Router with USB WNR2200 User Manual - Page 5

v1.0, September 2010

v

FCC Declaration Of Conformity

We NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that the model

WNR2200 N300 Wireless Router with USB WNR2200 complies with Part 15 of FCC Rules. Operation is subject to the

following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received, including interference that may cause undesired operation.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

methods:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and the receiver.

•

Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

Any changes or modification not expressly approved by the party responsible for compliance could void the user’s

authority to operate this equipment.

This product will be used for indoor operations.

This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment

should be installed and operated with minimum distance 20cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The availability of some specific channels and/or operational frequency bands are country dependent and are firmware

programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.

Section	Page
N300 Wireless Router with USB WNR2200 User Manual	1
Contents	8
About This Manual	12
Chapter 1 Configuring Your Internet Connection	14
Using the Setup Manual	14
Logging In to Your Wireless Router	15
Selecting a Language for Your Screen Display	17
Using the Setup Wizard	19
Viewing or Manually Configuring Your ISP Settings	19
Chapter 2 Safeguarding Your Network	23
Planning Your Wireless Network	23
Wireless Placement and Range Guidelines	24
Wireless Security Options	25
Manually Configuring Your Wireless Settings	26
Configuring WEP Wireless Security	30
Configuring WPA, WPA2, or WPA/WPA2 Wireless Security	32
Using Push 'N' Connect (WPS) to Configure Your Wireless Network	34
Using a WPS Button to Add a WPS Client	35
Using PIN Entry to Add a WPS Client	36
Configuring Advanced WPS Settings	38
Connecting Additional Wireless Client Devices After WPS Setup	39
Adding More WPS Clients	39
Adding Both WPS and Non-WPS Clients	39
Restricting Access to Your Router	41
Adding Guest Networks	42
Chapter 3 Protecting Your Network	44
Protecting Access to Your Wireless Router	44
Changing the Built-In Password	45
Restricting Access by MAC Address	45
Blocking Access to Internet Sites	47
Blocking Access to Internet Services	49
Configuring a User-Defined Service	50
Scheduling Blocking	51
Configuring E-mail Alert and Web Access Log Notifications	52
Viewing Logs of Web Access or Attempted Web Access	53
Setting the Time	54
Chapter 4 Using Network Monitoring Tools	56
Upgrading the Router Firmware	56
Upgrading Automatically to New Router Software	58
Upgrading Manually to New Router Software	58
Viewing Wireless Router Status Information	60
Connection Status	62
Statistics	63
Viewing a List of Attached Devices	64
Managing the Configuration File	65
Backing Up and Restoring the Configuration	65
Erasing the Configuration	66
Enabling Remote Management Access	67
Traffic Meter	69
Chapter 5 Customizing Your Network Settings	71
Using the LAN Setup Options	71
Using the Router as a DHCP Server	74
Address Reservation	74
Using a Dynamic DNS Service	75
Configuring the WAN Setup Options	77
Setting Up a Default DMZ Server	78
Configuring Static Routes	79
Allowing Inbound Connections to Your Network	81
How Your Computer Accesses a Remote Computer through Your Router	81
How Port Triggering Changes the Communication Process	83
How Port Forwarding Changes the Communication Process	84
How Port Forwarding Differs from Port Triggering	85
Configuring Port Forwarding to Local Servers	86
Adding a Custom Service	87
Editing or Deleting a Port Forwarding Entry	88
Configuring Port Triggering	88
Wireless Repeating (Also Called WDS)	92
Wireless Repeating Function	93
Setting Up the Base Station	94
Setting Up a Repeater Unit	95
Chapter 6 Fine-Tuning Your Network	96
Assessing Your Speed Requirements	97
Optimizing Your Network Bandwidth	98
Optimizing Wireless Performance	100
Changing the MTU Size	101
Quality of Service (QoS)	102
Using WMM QoS for Wireless Multimedia Applications	103
Configuring QoS for Internet Access	103
Universal Plug and Play	108
Chapter 7 USB Storage	110
USB Drive Requirements	110
File Sharing Scenarios	111
USB Storage Basic Settings	113
Editing a Network Folder	115
Configuring USB Storage Advanced Settings	116
Creating a Network Folder	118
ReadyShare Access	119
Unmounting a USB Drive	119
Specifying Approved USB Devices	120
Connecting to the USB Drive from a Remote Computer	121
Locating the Internet Port IP Address	121
Accessing the Router’s USB Drive Remotely Using FTP	121
Connecting to the USB Drive with Microsoft Network Settings	121
Enabling File and Printer Sharing	122
Chapter 8 Troubleshooting	123
Quick Tips	123
Troubleshooting Basic Functions	125
Cannot Access the Router Main Menu	126
Cannot Access the Internet	127
Troubleshooting a Network Using the Ping Utility	128
Testing the LAN Path to Your Router	129
Testing the Path from Your Computer to a Remote Device	130
Problems with Date and Time	130
Wireless Connectivity	131
Using Your Wireless Card Setup Program	131
Setting Up and Testing Basic Wireless Connectivity	132
Restoring the Default Configuration and Password	135
Appendix A Default Configuration and Technical Specifications	136
Restoring the Default Factory Configuration Settings	136
Technical Specifications	138
Appendix B Related Documents	140

Netgear WNR2200 N300 Wireless Router with USB WNR2200 User Manual - Page 5

FCC Declaration Of Conformity, Federal Communication Commission Interference Statement, IMPORTANT NOTE - n300 wireless router

Page 5 highlights