Netgear WNR834M WNR834M Reference Manual - Page 44
Table 5-1., Wireless Router Status Fields, This screen shows the following parameters - firmware
UPC - 606449047950
View all Netgear WNR834M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
NETGEAR RangeMax™ NEXT Wireless Router WNR834M Reference Manual This screen shows the following parameters: Table 5-1. Wireless Router Status Fields Field Account Name Firmware Version Internet Port MAC Address IP Address DHCP IP Subnet Mask Domain Name Server LAN Port MAC Address IP Address DHCP IP Subnet Mask Description This field displays the Host Name assigned to the router. This is the version of the current software the router is using. This will change if you upgrade your router. These parameters apply to the Internet (WAN) port of the router. This field displays the Media Access Control address, the physical address, being used by the Internet (WAN) port of the router. This field displays the IP address being used by the Internet (WAN) port of the router. If no address is shown, or is 0.0.0.0, the router cannot connect to the Internet. If set to None, the router is configured to use a fixed IP address on the WAN. If set to DHCP Client, the router is configured to obtain an IP address dynamically from the ISP. This field displays the IP Subnet Mask being used by the Internet (WAN) port of the router. For an explanation of subnet masks and subnet addressing, see "Internet Networking and TCP/IP Addressing" in Appendix B. This field displays the Domain Name Server addresses being used by the router. A Domain Name Server translates human-language URLs, such as http://www.netgear.com, into IP addresses. These parameters apply to the Local (LAN) port of the router. This field displays the Media Access Control address, the physical address, being used by the LAN port of the router. This field displays the IP address being used by the Local (LAN) port of the router. The default is 192.168.1.1 Identifies if the router's built-in DHCP server is active for the LAN attached devices. This field displays the IP Subnet Mask being used by the Local (LAN) port of the router. The default is 255.255.255.0 5-2 Maintenance v1.3, May 2006