Netgear WNXR2000 WNXR2000 Installation Guide (PDF) - Page 18

Item Ethernet LED Description • Solid. The Ethernet port is linked, but there is no activity. • Blinking. There is traffic on the Ethernet port. • Off. There is no Ethernet connection. Factory Reset Security Button Press the Factory Reset button for 1 second, then release to return the Powerline adapter to its factory default settings. After you plug in your new AV adapter, press the security button for 2 seconds, then press the security button on one of the other AV adapters in your existing network for 2 seconds. Both buttons must be pressed within 2 minutes. Note: The Security button does not work in power saving mode (see "Power LED is amber" in the "Troubleshooting Tips" table below). Warning: Do not press the Security button on the Powerline adapter until installation is complete and the adapters are communicating with each other (indicated by the blinking Powerline LED). Pressing this button too soon can temporarily disable Powerline communication. If this should occur, use the Factory Reset button to return the Powerline adapter to its factory default settings. 18