Netgear WNXR2000 WNXR2000 Installation Guide (PDF) - Page 4

About Your WNXR2000 The WNR2000 router works with the XAVP1000 Y-cable adapter to help you create a Powerline and wireless network. To set up your network, do the following: • Set Up the XAVP1000 Adapter • Connect the WNXR2000 Powerline AV Router Set Up the XAVP1000 Adapter Follow these steps to connect the XAVP1000 adapter to the router: 1. Plug the network connector on the Y-cable adapter into one of the orange Ethernet ports on the router. 2. Plug the Power connector on the Y-cable adapter into the power inlet on the router. 3. Plug the XAVP1000 adapter into an electrical outlet. Make sure that: • You do NOT plug the adapter into a Power Strip. • The electrical outlet is not controlled by a wall switch to avoid someone unknowingly turning off the power to the outlet. 4