Netgear WNXR2000 WNXR2000 Installation Guide (PDF) - Page 19

Troubleshooting Tips Power LED is off Power LED is amber Powerline LED is off Powerline LED is amber or red Ethernet LED is not blinking Make sure that power is supplied to the electrical outlet, and that the Powerline devices are not plugged into an extension cord, power strip, or surge protector. Power saving mode occurs when the Ethernet LED is off. This can occur when: • the Ethernet cable is unplugged. • the device connected through the Ethernet cable is turned off. • the adapter is idle for 10 minutes. It returns to normal mode within 2 seconds once the Ethernet link is up. • If you have set network security, make sure that all Power line devices are using the same encryption key; see the online User Manual for details. • Press the Reset button on each device for 1 second to return the Powerline adapter to its factory default settings. • Move the Powerline device to a closer location. • Make sure that the Ethernet cables are working and securely plugged into the devices. • Press the Reset button on each device for 1 second to return the Powerline adapter to its factory default settings. 19