Netgear XE102 XE102 User Manual - Page 16
Setting the Network Password, Click Enter Password. - user s guide
 |
UPC - 606449036794
View all Netgear XE102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
XE102 Wall-Plugged Ethernet Bridge User Guide 3. Select a PowerLine device. Note: If more than one remote device is listed, you can identify each one from its MAC address. 4. Click Enter Password. Figure 5 5. Enter the password from the label on the back of the selected PowerLine device, and click OK. 6. Repeat this step for all devices that you want attached to your network. Setting the Network Password To set the network password: 1. Click the Security tab. Figure 6 8 v1.0, June 2007
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22
 |
 |
XE102 Wall-Plugged Ethernet Bridge User Guide
8
v1.0, June 2007
3.
Select a PowerLine device.
4.
Click Enter Password.
5.
Enter the password from the label on the back of the selected PowerLine device, and click OK.
6.
Repeat this step for all devices that you want attached to your network.
Setting the Network Password
To set the network password:
1.
Click the Security tab.
Note:
If more than one remote device is listed, you can identify each one from its
MAC address.
Figure 5
Figure 6