Netgear XE102 XE102 User Manual - Page 20
Default Configuration Settings, HomePlug Light Not On, Ethernet Light is Off - powerline adapter
UPC - 606449036794
View all Netgear XE102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
XE102 Wall-Plugged Ethernet Bridge User Guide HomePlug Light Not On If the power light is on but the HomePlug light is not, check the following: • Make sure that power is being provided to more than one PowerLine device. Another PowerLine device must be installed for successful communication across the PowerLine. • Verify that the network password is the same on all devices in the PowerLine network. Ethernet Light is Off • Make sure that the Ethernet cable is plugged in properly to a router LAN port. • On the attached Ethernet device or network adapter card, check that the Link light is on. Default Configuration Settings The following table shows default settings for the XE102 Wall-Plugged Ethernet Bridge. Table 8. PowerLine Device Default Configuration Settings Feature Network Port Speed Port Duplex Administration Device password PowerLine Encryption password Description 10/100 Mbps, Auto-negotiation Auto-negotiation Auto uplink See product label. HomePlug 12 v1.0, June 2007