Nikon 9609 D60 User's Manual - Page 196

Specifications Quick Charger MH-23 Rated input AC 100-240 V (50/60 Hz) Rated output DC 8.4 V, 0.9 A Supported batteries Rechargeable Li-ion Battery EN-EL9 Charging time Approx. 90 minutes when battery is fully discharged Operating temperature 0-40 °C (32-104 °F) Dimensions (W× H × D) Approx. 82.5 × 28 × 65 mm (3.2 × 1.1 × 2.6 in.) Length of cord Approx. 1.8 m (5 ft. 11 in.) Weight Approx. 80 g (2.8 oz.), excluding power cable Rechargeable Li-ion Battery EN-EL9 Type Rechargeable lithium-ion battery Rated capacity 7.4 V, 1000 mAh Dimensions (W× H × D) Approx. 36 × 56 × 14 mm (1.4 × 2.2 × 0.6 in.) Weight Approx. 51 g (1.8 oz.), excluding terminal cover Technical Notes C Battery Life Battery life varies with charge state and shooting conditions. The number of shots that can be taken with a fully-charged EN-EL9 battery (1000mAh) is indicated below. • AF-S DX NIKKOR 18-55mm f/3.5-5.6G ED II Approximately 520 shots in single-frame release mode Approximately 2,000 shots in continuous release mode • AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR with vibration reduction (VR) on Approximately 500 shots in single-frame release mode Approximately 1,850 shots in continuous release mode Battery life for single-frame release mode is measured according to CIPA standards: lens cycled from infinity to minimum range and shutter released at default settings once every 30s; flash fired with every other shot. Battery life for continuous release mode is measured with image quality set to JPEG Basic, an image size of x, a shutter speed of 1/250s, the shutter release pressed halfway for three seconds and focus then cycled from infinity to minimum range three times; after six shots, the monitor is turned on for five seconds and the camera not touched for six seconds after the monitor turns off; the cycle is repeated once exposure meters have turned off. • Using the monitor • Taking NEF (RAW) photographs • Keeping the shutter-release button pressed • Slow shutter speeds halfway • Repeated autofocus operations • Using vibration reduction with VR lenses To ensure maximum battery performance: • Keep the battery contacts clean. Soiled contacts can reduce battery performance. • Use batteries immediately after charging. Batteries will lose their charge if left unused. • The battery level displayed by the camera may vary with changes in temperature. 184