Nikon COOLPIX P950 Reference Manual - Page 269

flashes on the screen. • The camera clock has not been set. Set the date and time in the setup menu [Time zone and date (page 227)]. • If the camera clock has not been set, images and movies saved before the clock is set are dated "00/00/0000 00:00" and "01/01/2020 00:00" respectively. Date and time of recording are not correct. Set the date and time in the setup menu [Time zone and date (page 227)]. The camera clock is not as accurate as ordinary watches or clocks. Periodically compare the time of the camera clock with that of a more accurate timepiece and reset as required. No information displayed on the screen. Shooting and photo information may be hidden. Press the button until information is displayed. Switching the information displayed on the screen ( button) (page 32) [Date stamp] not available. The camera clock has not been set. Set the date and time in the setup menu [Time zone and date (page 227)]. Date not stamped on images even when [Date stamp] is enabled. • The current shooting mode does not support [Date stamp]. Notes about [Date stamp] (page 233) • A function that restricts the [Date stamp] function is enabled. Functions that cannot be used simultaneously when shooting (page 127) • The date cannot be stamped on movies. Screen for setting time zone and date is displayed when the camera is turned on. The camera settings reset. The clock battery is exhausted; all settings were restored to their default values. Configure the camera settings again. The internal clock battery is used to power the camera clock and to retain certain settings. Charging time of the clock battery takes about 10 hours when you insert the battery into the camera or connect the AC adapter (available separately) to the camera, and the clock battery operates for several days even after the camera battery is removed. 269 If there is a problem Troubleshooting