Nikon COOLPIX S3300 Reference Manual - Page 188
Time zone and date, Hide info, Photo info, Monitor settings, Print date, Print, Problem
View all Nikon COOLPIX S3300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Troubleshooting Problem Cause/Solution A Monitor is blank. Monitor is hard to read. Date and time of recording are not correct. • The camera is off. • Battery is exhausted. • Standby mode for saving power. Press the power switch, shutter-release button, A button, c button, or b (e movie-record) button. • When flash lamp flashes, wait until flash has charged. • The camera and computer are connected via USB cable. • The camera and TV are connected via audio/ video cable. • Adjust monitor brightness. • Monitor is dirty. Clean monitor. • If the camera clock has not been set, "Date not set" indicator flashes with shooting and movie recording. Images and movies recorded before clock is set are dated "00/ 00/0000 00:00" or "01/01/2012 00:00" respectively. Set the correct time and date from the Time zone and date option in the setup menu. • The camera clock is not as accurate as ordinary watches or clocks. Periodically compare the time of the camera clock with that of a more accurate timepieces and reset as required. 21 20 21 53 72, 75 72, E17 86, E53 F6 22, E50 23, E50 No indicators displayed in Hide info is selected for Photo info in monitor. Monitor settings in the setup menu. 86, E53 Print date not available. The camera clock has not been set. 22, 86, E50 Date not appearing on images even when Print date is enabled. • The current shooting mode is one that does not support Print date. 86, E55 • The date cannot be imprinted on movies. Screen for setting time zone and date is displayed when the camera is turned Clock battery is exhausted; all settings were on. restored to their default values. 22, 23 The camera settings reset. Monitor turns off, and the power-on lamp flashes rapidly. Battery temperature is high. Turn off the camera and allow battery to cool down before resuming use. After the lamp flashes for three minutes, the camera will turn off automatically. 21 Pressing the power switch also turns off the camera. F8 Technical Notes and Index