Nikon COOLPIX S4300 Reference Manual - Page 183

Auto Off, When the Monitor Turns off for the Power Saving Function, Auto Off Settings

Page 183 highlights

k Auto Off Tap the d tab M Tap z (Setup menu) M k Auto off The Setup Menu When the camera is on and a period of time passes without any operations having been performed, the monitor will be turned off and the camera will enter standby mode (A23) to save power. In this option, set the time allowed to elapse before the camera enters standby mode. 30 s, 1 min (default setting), 5 min, and 30 min can be selected. Reference Section C When the Monitor Turns off for the Power Saving Function • Power-on lamp flashes in standby mode. • Camera turns off after approximately three minutes passes in standby mode. • To reactivate the monitor while the power on lamp is flashing, press any of the following buttons: - The power switch, shutter-release button, A button, or b (e movie-record) button C Auto Off Settings • The time allowed to elapse before the camera enters standby mode is fixed in the following situations: - When a setting screen, mode selection menu, or the setup menu is displayed: three minutes - During slide show playback: up to 30 minutes - When the AC adapter EH-62G is connected: 30 minutes • The camera does not enter standby mode when transferring images using an Eye-Fi card. E75

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224

E
75
The Setup Menu
Reference Section
k
Auto Off
When the camera is on and a period of time passes without any operations having
been performed, the monitor will be turned off and the camera will enter standby
mode (
A
23) to save power.
In this option, set the time allowed to elapse before the camera enters standby
mode.
30
s
,
1
min
(default setting),
5
min
, and
30
min
can be selected.
C
When the Monitor Turns off for the Power Saving Function
Power-on lamp flashes in standby mode.
Camera turns off after approximately three minutes passes in standby mode.
To reactivate the monitor while the power on lamp is flashing, press any of the following buttons:
-
The power switch, shutter-release button,
A
button, or
b
(
e
movie-record) button
C
Auto Off Settings
The time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
-
When a setting screen, mode selection menu, or the setup menu is displayed: three minutes
-
During slide show playback: up to 30 minutes
-
When the AC adapter EH-62G is connected: 30 minutes
The camera does not enter standby mode when transferring images using an Eye-Fi card.
Tap the
d
tab
M
Tap
z
(Setup menu)
M
k
Auto off