Nikon COOLPIX S4300 Reference Manual - Page 196
Error Messages
View all Nikon COOLPIX S4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
Error Messages The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them. Display Cause/Solution A O (flashes) Clock not set. Set date and time. E65 Battery exhausted. Charge or change battery. 16, 18 Battery temperature high Battery temperature is high. Turn off camera, and allow battery to cool down before resuming use. After five seconds, the monitor will turn off, and the power-on lamp will flash quickly. After the 23 lamp flashes for three minutes, the camera will turn off automatically. Pressing the power switch also turns off the camera. The camera will turn The camera has become hot. off to prevent The camera turns off automatically. Leave the camera 84 overheating. off until it has cooled and then turn it on again. Q (● flashes red) Camera cannot focus. • Refocus. • Focus on another subject positioned at the same distance from the camera as the intended subject. 30, 31 40 Please wait for the camera to finish recording. Camera cannot perform other operations until saving is complete. Wait until message clears from display automatically - when recording is complete. Memory card is write Write-protect switch is in "lock" position. protected. Slide write-protect switch to "write" position. - Not available if Eye-Fi card is locked. Write-protect switch of Eye-Fi card is in "lock" position. Slide the write-protect switch to "write" position. Error accessing Eye-Fi card. • Use an approved card. • Check that connectors are clean. • Confirm that memory card is correctly inserted. - E82 20 20 Reference Section E88