Nikon COOLPIX S6200 Reference Manual - Page 72
Using the Flash (Flash Modes), Effective Range of the Flash - not charging
View all Nikon COOLPIX S6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Features That Can Be Set Using the Multi Selector Using the Flash (Flash Modes) You can set the flash mode to match the shooting conditions. 1 Press the multi selector H (m flash mode). 2 Use the multi selector to select the desired mode and press the k button. • See "Available Flash Modes" (A 57) for more information. • If a setting is not applied by pressing the k button within a few seconds, the selection will be canceled. Auto • When U (auto) is applied, D is only displayed for a few seconds, regardless of Monitor settings settings (A 88). 29m 0s 760 3 Frame the subject and take a picture. • The flash lamp indicates the status of the flash when you press the shutter-release button halfway. - On: The flash will fire when you press the shutter-release button all the way down. - Blinking: The flash is charging. The camera cannot take pictures. - Off: The flash will not fire when a picture is taken. • If the battery is low, the monitor will turn off in order to save power while the flash is charging. Shooting Features C Effective Range of the Flash When ISO sensitivity is set to Auto, the flash has a range of 0.5 to 4.6 m (1 ft 8 in. to 15 ft) at the maximum wide-angle zoom position and a range of 0.5 to 3.0 m (1 ft 8 in. to 9 ft 10 in.) at the 56 maximum telephoto zoom position.