Nikon COOLPIX S8200 Reference Manual - Page 37

Step 1 Turn the Camera On Turning the Camera On and Off • The power-on lamp will light in green briefly then turn off, and then the monitor will turn on. • To turn off the camera, press the power switch. When the camera turns off, the power-on lamp and the display turn off. • To turn on the camera and switch to playback mode, press and hold the c (playback) button. The lens will not extend. The Basics of Shooting and Playback C Power Saving Function (Auto Off) If no operations are performed for a while, the monitor will turn off, the camera will enter standby mode, and the power-on lamp will blink. If no operations are performed for another three minutes, the camera will turn off automatically. You can turn the monitor back on while the camera is in standby mode by performing any of the following: ➝ Press the power switch, shutter-release button, c (playback) button, or b (e movie-record) button. ➝ Rotate the mode dial. Blinks No operations performed No operations performed 29m 0s 3 min 840 Camera enters standby mode. Camera turns off. • The time that elapses before the camera enters standby mode can be changed using the Auto off setting in the setup menu (A 94). • By default, the camera enters standby mode in about one minute when you are using shooting mode or playback mode. • If you are using the optional AC Adapter EH-62F, the camera enters standby mode after 30 minutes. 21