Nikon F80QD User Manual - Page 57

Miscellaneous Custom Setting Menu Function Options 1 Automatic film rewind at the end of film roll 0: Activated (initial setting) 1: Disabled 2 Reset to DX film speed setting for new film 0: Activated (initial setting) 1: Disabled Bracketing order 3 0: Metered value, under, over (initial setting) 1: Under, metered value, over 4 On-Demand Grid Lines superimposition display 0: Not displayed (initial setting) 1: Displayed Illumination for superimposition 5 0: Automatically illuminated for low light (initial setting) 1: Cancelled 2 : Always illuminated Focus area selection 6 0: Normal selection (initial setting) 1: Enables successive rotation of focus area selection 7 Auto Exposure Lock when shutter release button is lightly pressed 0: Disabled (initial setting) 1: Activated 8 Auto film loading when camera back is closed 0: Enabled (initial setting) 1: Disabled 9 Closest-subject-priority Dynamic AF in Single Servo AF 0: Enabled (initial setting) 1: Disabled 10 Closest-subject-priority Dynamic AF in Continuous Servo AF 0: Disabled (initial setting) 1: Enabled AE-L/AF-L button 11 0: AE/AF simultaneous lock (initial setting) 1: Auto Exposure lock only 2: Autofocus lock only 3: Auto Exposure lock (remains locked until button is pressed again) 4: AF operation only starts by pressing AE- L/AF-L button Function Command Dial functions 12 13 Film rewind Multiple exposure 14 Time delay for auto meter-switch-off 15 Self-timer duration 16 17 LCD illuminates by pressing any function button 18 AF-Assist Illuminator activation ISO film speed setting for data imprint between frames 19 Options 0: Main-Command Dial for shutter speed; Sub-Command Dial for aperture setting (initial setting) 1: Main-Command Dial for aperture; SubCommand Dial for shutter speed setting 0: High-speed film rewind (initial setting) 1: Quiet film rewind 0: Single shutter release operation (initial setting) 1: Continuous shutter release operation 4 : 4 sec. 6 : 6 sec. (initial setting) 8 : 8 sec. 16 : 16 sec. 2 : 2 sec. 5 : 5 sec. 10 : 10 sec. (initial setting) 20 : 20 sec. 0: Disabled (initial setting) 1: Activated 0: Activated (initial setting) 1: Disabled 0 : Automatically (initial setting) 1 : Under ISO 25 2 : ISO 32-80 3 : ISO 100 4 : ISO 125-200 5 : Over ISO 250 To create Custom Setting: Set the exposure mode/Custom Setting dial to ·. Rotate the Main-Command Dial to select menu number and rotate the SubCommand Dial to select desired option number. See pages 70-75 for details. 112 113