Nikon S210 S210 User's Manual - Page 132
Error Messages - problems
UPC - 018208261017
View all Nikon S210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Error Messages The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them. Display O (blinks) B Problem Clock not set. Battery running low. N Battery exhausted. P Battery temperature high Battery exhausted. Battery temperature is high. Q (● blinks red) Camera cannot focus. P Please wait for the camera to finish recording. O N Memory card is write protected. P This card cannot be used. P This card cannot be read. Camera cannot perform other operations until recording is complete. Write-protect switch is in "lock" position. Error accessing memory card. Solution A Set clock. 101 Prepare to charge or 12 change battery. Charge or change battery. 12 Turn off camera, and allow battery to cool down before resuming use. After 5 seconds, this message will disappear, the monitor will turn off, and the power-on lamp and flash lamp will blink rapidly. After the lamps blink for 30 seconds, the camera will turn off automatically, but you can also press the power switch to turn it off manually. • Refocus. • Use focus lock. Wait until message clears from display automatically when recording is complete. 15 24, 25 90 25 Slide write-protect switch 19 to "write" position. • Use approved card. 115 • Check that connectors 18 are clean. • Confirm that memory 18 card is correctly inserted. Technical Notes 120