Nikon SB 27 Instruction Manual - Page 17
The ready-light
UPC - 018208047086
View all Nikon SB 27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
The ready-light The ready-light comes ON when charging is completed. TTL A M mm ZOOM M ISO ft m 60 18 30 9 15 4 72 41 2 0.6 When the SB-27 is fully charged and ready to fire, the ready-light comes ON. Be sure to check that the ready-light is ON when releasing the shutter. The ready-light blinks when flash fires at its maximum output. TTL A M mm ZOOM M ISO ft m 60 18 30 9 15 4 72 41 2 0.6 In AUTO mode, if the ready-light blinks for approx. 3 seconds after shooting, it means that the flash has fired at its maximum output but the light may have been insufficient. (See page 40.) -In that case, reconfirm the flash shooting distance range, aperture and flash-to-subject distance, and if necessary, use a wider aperture or move closer to the subject and then reshoot. Replace batteries with a fresh set. • Replace alkaline-manganese batteries (or lithium batteries) if the ready-light takes more than 30 seconds to light up. • Recharge NiCd batteries if the ready-light takes more than 10 seconds to light up.