Nikon SB 27 Instruction Manual - Page 73
Using an external power source
UPC - 018208047086
View all Nikon SB 27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Using an external power source Nikon DC Unit SD-7 or SD-8/8A can be used as an optional external power source supplying long and stable power, increasing the number of flash firings, and providing faster recycling time. To use a DC Unit, connect its power cord to the SB-27's external power source terminal. -Even when powered with a DC Unit, the SB-27 still requires batteries inside the flash unit. Do not remove the batteries. Available external power source (optional) See page 78. Batteries External power C-type alkalinesource SD-7 manganese (x 6) External power AA-type alkaline- source manganese (x 6) SD-8/8A** AA-type NiCd (x 6) Min. recycling time* (approx.) 2.5 sec. No. of flash/ recycling time (approx.) 500 times/2.5-30 sec. 2.5 sec. 350 times/2.5-30 sec. 1.8 sec. 150 times/1.8-30 sec. *Data measured with fresh batteries. **Install the same type of batteries in the SB-27 and SD-8/SD-8A. Use only Nikon-approved external power source units. Using external power sources other than those specified by Nikon may cause unexpected damage to the Speedlight.