Nikon SB 27 Instruction Manual - Page 26
Cameras
UPC - 018208047086
View all Nikon SB 27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Flash operation in AUTO mode (Cameras in Procedures 1 Lens in use Nikkor lenses with built-in CPU With a G-type Nikkor lens attached to F4-Series, F-801s/ N8008s, F-801/N8008 cameras, the A and M exposure modes cannot be used. Nikkor lenses without built-in CPU*4 Camera settings 2 Available flash operation*1 3 Metering system *2 Matrix Balanced Fill-Flash tø Matrix Metering CenterWeighted/Spot Fill-Flash tø (except Pronea 600i/6i cameras) CenterWeighted/Spot Metering Standard TTL Flash t Desired metering system CenterWeighted/Spot Fill-Flash tø (except Pronea 600i/6i cameras) Standard TTL Flash t CenterWeighted/Spot Metering *1 Press the "M" button to change the SB-27's flash mode indicator. *2 With an F4-Series camera set to Spot Metering, flash operation is automatically set to Standard TTL Flash mode. *3 S: Shutter-priority auto, P: Programmed auto, A: Aperture-priority auto, M: Manual *4 Matrix Balanced Fill-Flash operation is only possible with F4-Series camera even when AI-S or AI-type Nikkor lenses, Nikon Series E lenses, and lenses for the F3AF are mounted. With a non-CPU lens attached to Pronea 600i/6i cameras, set the exposure mode to Manual only. The camera's exposure meter cannot be used. Set and confirm the aperture using the lens aperture ring. *5 Center-Weighted Fill-Flash/Spot Fill-Flash is not possible with Pronea 600i/6i cameras. Only Standard TTL Flash can be performed when the camera's exposure mode is set to Manual (M).