Nikon SB 27 Instruction Manual - Page 57
thru VI
UPC - 018208047086
View all Nikon SB 27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
thru VI) 4 Set up the diffuser card as shown. The SB-27's built-in diffuser card is effective for close-up flash operation from 0.3m (1 ft). -Avoid using the built-in diffuser card for close-up flash operation in non-TTL Auto Flash mode. (You cannot obtain a correct exposure if the diffuser card is set.) 5 Set the camera's aperture based on the following equation and table. GTUPQ ʾɹ DPFGGJDJFOU GMBTIUPTVCKFDUEJTUBODF N ISO film speed and coefficient ISO film speed 100 or lower 125-400 500 or higher Coefficient* 1 (3.3) 2 (6.6) 2.8 (9.2) *Numbers in parentheses ( ) represent coefficient for foot measurement. For example, with a subject located 0.5m (1.6 ft) away using ISO 100 film and a bounce flash adapter, this is how you would calculate the aperture: GTUPQʾ ʹ * An aperture of f/2 is suggested. We recommend using the smallest possible aperture ( f/2.8 or f/4). 6 Confirm that the ready-light is ON, then release the shutter to fire the flash. TTL A M ISO ft m 60 18 30 9 15 4 72 41 2 0.6 If the ready-light blinks for 3 seconds after shooting, see page 40.