Nikon SB 27 Instruction Manual - Page 58

Close-up flash operation in AUTO mode Cameras

Get Nikon SB 27 - Hot-shoe clip-on Flash PDF manuals and user guides
UPC - 018208047086
View all Nikon SB 27 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Close-up flash operation in AUTO mode (Cameras in Close-up flash operation using a TTL Remote Cord When you want to ensure sufficient illumination, or illuminate your subject from the side or the back, detach the SB-27 from the camera and use an optional TTL Remote Cord. 1 Connect the SB-27 to the camera using a TTL Remote Cord. -Use optional TTL Remote Cord SC-24 when connecting the SB-27 to an F4-Series camera fitted with a High-Magnification Finder (DW-20 or DW-21). -Use optional TTL Remote Cord SC-17 when connecting the SB-27 to other cameras with an ISO type hot shoe. 2 After first setting the camera's exposure mode to A or M, set the SB-27's flash mode selector to "AUTO." 3 Position the SB-27 properly and adjust the angle. -Be sure to position the SB-27 and adjust the angle so as to sufficiently illuminate the subject. 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Close-up flash operation in AUTO mode (Cameras in
58
When you want to ensure sufficient illumination, or illuminate
your subject from the side or the back, detach the SB-27
from the camera and use an optional TTL Remote Cord.
Close-up flash operation using a TTL Remote Cord
1
Connect the SB-27 to the camera using a TTL
Remote Cord.
—Use optional TTL Remote Cord SC-24 when connecting the SB-27 to
an F4-Series camera fitted with a High-Magnification Finder (DW-20
or DW-21).
—Use optional TTL Remote Cord SC-17 when connecting the SB-27 to
other cameras with an ISO type hot shoe.
2
After first setting the camera’s exposure mode to A or M,
set the SB-27’s flash mode selector to “AUTO.”
3
Position the SB-27 properly and adjust the angle.
—Be sure to position the SB-27 and adjust the angle so as to
sufficiently illuminate the subject.