Nikon SB-R200 Wireless Speedlight Users Manual - English - Page 110
Overview of close-up flash operation using cords
View all Nikon SB-R200 Wireless Speedlight manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
1 Overview of close-up flash operation (using cords) When used with cameras not compatible with CLS, close-up flash operation is possible using the TTL Cord SC-30 (optional) to connect the SU-800 and SB-R200. • D-TTL mode is available with digital SLR cameras not compatible with CLS, and TTL mode is available with film-based SLR cameras compatible with TTL auto flash mode. (p. 116) • Close-up flash operation (using cords) is not possible with CLS-compatible cameras. Notes on performing close-up flash operation (using cords) • As shown in the illustration, the SB-R200 connected to the right cord is assigned as Group A, and the SB-R200 connected to the left cord is assigned as Group B. • When the SU-800 and SB-R200 are connected using cords, operations of [ON/Off] and Target light buttons on the SB-R200 become ineffective. The settings of the [GROUP] and [CHANNEL] select dials become invalid. • The SB-R200 turns on when the SU-800 is turned on. The SB-R200 turns off when the SU-800 is turned off. Group B Group A Methods for setting up 1 Setting up the SU-800 and SB-R200. Set up the SU-800 and SB-R200 in the same way as described in "Flash operation using the Nikon Close-up Speedlight Commander Kit R1C1" (p. 28). • The same set-up is applicable when using the Speedlight Stand AS-20. 2 Connect the flash units using cords. Use the optional TTL Cord SC-30 to connect between the TTL cord terminals of the SU-800 and SB-R200. WISRPEELEEDSLISGRHETMSOBT-ER200 110