Nikon SB-R200 Wireless Speedlight Users Manual - English - Page 85
Setting a group on the remote flash units
View all Nikon SB-R200 Wireless Speedlight manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
CHANNEL 34 2 1 GROUP C B A 5 Setting a channel number on the Commander unit. Set the communication channel through which the Commander and remote flash units exchange data. • Select one of the four available channels. The same channel number is set to all groups A, B and C. • Press the [SEL](FUNC.) button to display the channel number (blinking). Press the [W] or [X] button to change the channel number. Press the [SEL](FUNC.) button once again and the channel number will stop blinking. The last channel number to blink is the one that has been set automatically. • The channel number blinks during adjustment and stops after blinking six times unless an adjustment is made. The last channel number to blink is the one that has been automatically set. 6 Setting a channel number on the remote flash unit(s) Select one of the four available channels. Be sure to set the same channel number as set on the SU-800. • Be sure to set the channel number of the remote flash unit(s) to 3 when using a Nikon D70-Series camera, otherwise the remote flash unit(s) will not fire. • With the SB-R200, rotate the [CHANNEL] select dial to set the channel number. • With the SB-910, SB-900, SB-800, SB-700 or SB-600, read the user's manual for each model. 7 Setting a group on the remote flash unit(s) Set the group of remote flash unit(s) to A, B or C. Once set, the remote flash units will operate according to the controls for each group as set on the Commander. • Set the group of the remote unit(s) to group A or B when using a Nikon D800-Series, D700, D300-Series, D200, D90, D80 or D7000 camera, otherwise the flash unit(s) will not fire. • Set the group of the remote unit(s) to group A when using a Nikon D70-Series camera, otherwise the flash unit(s) will not fire. • With the SB-R200, rotate the [GROUP] select dial to set the group name. • With the SB-910, SB-900, SB-800, SB-700 or SB-600, read the user's manual for each model. 85 z Details on Commander flash operation and shooting procedures