Nikon SB-R200 Wireless Speedlight Users Manual - English - Page 39

Setting up the SB-R200.

Get Nikon SB-R200 Wireless Speedlight PDF manuals and user guides View all Nikon SB-R200 Wireless Speedlight manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

z Flash operation using the R1C1 AS-20 2 Setting up the SB-R200. 1 Install the battery in the SB-R200 in the same way as No. 3 in "Procedures for close-up flash operation." (p. 30) LOCK 2 Slide the SB-R200's Mounting Foot into the AS-20's Speedlight Mounting Shoe and slide the lock switch. The Mounting Foot cannot be inserted in reverse. • Slide the lock switch until it stops and make sure that the red part can no longer be seen. Group B 4m (13.1 ft) 3 Set up the SB-R200. 3m (9.8 ft) Group C 30˚ 30˚ Commander unit As a basic guide, the effective shooting distance between the Master/ Commander unit and the SB-R200 is approx. 4m (13.1 ft) or less in the front position, and approx. 3m (9.8 ft) at both sides. These ranges vary slightly depending on conditions and/or ambient light. Group A 3m (9.8 ft) With the SU-800 • Be sure to place all SB-R200 units that are set in the same group close together. • The set up range of the SB-R200 units vary depending on the Commander unit (camera, Speedlight, etc.) For details, see your Speedlight or camera's user's manual. • For notes on setting up the SB-R200, see "Setting up the SB-R200" on page 108. 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
39
Flash operation using the R1C1
2
Setting up the SB-R200.
1
Install the battery in the SB-R200 in the same way as No. 3 in
“Procedures for close-up flash operation.” (p. 30)
2
Slide the SB-R200’s Mounting Foot
into the AS-20’s Speedlight
Mounting Shoe and slide the lock
switch.
The Mounting Foot cannot be inserted in
reverse.
•
Slide the lock switch until it stops and make
sure that the red part can no longer be seen.
3
Set up the SB-R200.
As a basic guide, the
effective shooting distance
between the Master/
Commander unit and the
SB-R200 is approx. 4m
(13.1 ft) or less in the front
position, and approx. 3m
(9.8 ft) at both sides.
These ranges vary slightly
depending on conditions
and/or ambient light.
•
Be sure to place all SB-R200 units that are set in the same group close together.
•
The set up range of the SB-R200 units vary depending on the Commander unit (camera,
Speedlight, etc.) For details, see your Speedlight or camera’s user’s manual.
•
For notes on setting up the SB-R200, see “Setting up the SB-R200” on page 108.
AS-20
LOCK
LOCK
30˚
30˚
Group A
Group C
Group B
With the SU-800
Commander
unit
3m (9.8 ft)
3m (9.8 ft)
4m
(13.1 ft)