Nikon SB-R200 Wireless Speedlight Users Manual - English - Page 20
SU-800's LCD panel and icons, Icons in close-up flash operation - i ttl wireless remote speedlight flash
![]() |
View all Nikon SB-R200 Wireless Speedlight manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Speedlight parts, their functions, and accessories SU-800's LCD panel and icons Icons on the SU-800's LCD panel show the status of the operations set. These icons vary depending on the settings and the combination of camera and flash units in use. • The below illustrations are for reference only and may differ to the actual display. Icons in close-up flash operation Display in TTL mode 1 Wireless Flash A control signal is sent from the SU-800 to the remote flash units such as the SB-R200. 2 Close-up Mode Close-up function is set to "activated." 3 Monitor Preflashes Just before the flash fires, the Speedlight fires a series of imperceptible preflashes to collect necessary data for actual flash firing. 4 TTL Mode Measuring the flash illumination reflected back from the subject, the camera automatically controls the flash output level to give the correct exposure. 5 Auto FP High-Speed Sync Auto FP High-Speed Sync. is available when the SU-800 is connected to cameras compatible with Auto FP HighSpeed Sync. (p. 96). 6 Low Battery-power Replace the battery. 7 Flash Output Level (Group A) Visually indicates the group A's flash output level in the TTL mode. Display in M (manual) mode 8 Flash Output Level (Group B) Visually indicates the group B's flash output level in the TTL mode. 9 Flash Output Level Ratio (Groups A : B) Indicates the flash output level ratio between groups A and B in the TTL mode. 0 Channel Represents the communication channel number through which the SU-800 and SB-R200 exchange data. ! Flash Output Level Compensation (Groups A, B) Represents flash output level compensation for groups A and B in the TTL mode. @ CLS-compatible camera The SU-800 is connected to cameras compatible with CLS. # Manual Flash The flash always fires at a specified output in combination with the aperture and light output level (guide number). $ Manual Flash Output Level Represents flash output level for each group in Manual flash mode. 20
![](/manual_guide/products/nikon-sbr200-wireless-speedlight-users-manual-english-13120fe/20.png)