Nikon SB-R200 Wireless Speedlight Users Manual - English - Page 77
If the red ready-light blinks immediately after shooting
View all Nikon SB-R200 Wireless Speedlight manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
GROUP C B A E AB L SEL READY LOC 10 Setting a group on the SB-R200. Rotate the [GROUP] select dial on the SB-R200 to set the group. Once set, the SB-R200 operates according to the controls as set on the SU-800. 11 Compose a picture and shoot with flash. Confirm that the red ready-lights on the SU-800 and SB-R200 are on, then release the shutter. • For details on test firing, refer to page 88. v If the red ready-light blinks immediately after shooting SPWEIERDELLIEGSHST R S ON/OFF In the TTL mode, when the SB-R200 flash has fired at its maximum output and underexposure may have occurred, the red ready-light on the SB-R200 blinks for approx. 3 sec. (The ready-lights on the SU-800 and in the camera's viewfinder do not blink.) To compensate, set a higher ISO sensitivity or use a wider aperture and reshoot. z Details on close-up flash operation and shooting procedures 77