Nikon Z 50 Reference Manual - Page 349
Network Settings, Menu Guide >, The Setup Menu, General, Wireless, Infrastructure mode
View all Nikon Z 50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 349 highlights
Network Settings Select Create profile to create a new network profile (0 353, 357). If more than one profile already exists, you can press J to select a profile from a list. To edit an existing profile, highlight it and press 2. The following options will be displayed: • General: The profile name and password. Select Profile name to rename the profile (by default, the profile name is the same as the network SSID). To require that a password be entered before the profile can be changed select On for Password protection (to change the password, highlight On and press 2). • Wireless: Adjust settings for connection to a network via a router (infrastructure mode) or for direct wireless connection to the camera (access-point mode). - Infrastructure mode: Enter the network SSID and password and choose the type of authentication/encryption used on the network (OPEN or WPA2-PSK-AES). The channel is selected automatically. - Access-point mode: Enter the SSID and choose a channel (select Auto for automatic channel selection or Manual to choose the channel manually) and authentication/encryption type (OPEN or WPA2-PSK-AES) used for connection to the camera. If WPA2-PSK-AES is selected for Authentication/ encryption, you can also set the camera password. • TCP/IP: If Enable is selected for Obtain automatically, the IP address and sub-net mask for infrastructure mode connections will be acquired via a DHCP server or automatic IP addressing. Select Disable manually to enter the IP address (Address) and sub-net mask (Mask). Note that an IP address is required for infrastructure mode connections. Menu Guide > B The Setup Menu 321