Nikon Z 50 Reference Manual - Page 353
Energy Saving, Slot Empty Release Lock, Enable release, Release locked
View all Nikon Z 50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 353 highlights
Energy Saving G button ➜ B (setup menu) In photo mode, the shooting display will turn off to save power approximately 15 seconds before the standby timer expires. Option Enable Disable Description Enable energy saving. The display refresh rate may drop. Disable energy saving. Note selecting Disable does not stop the shooting display dimming a few seconds before the standby expires. D Note: Energy Saving • Note that even when Enable is selected, energy saving will not function: - If No limit is selected for Custom Setting c3 (Power off delay) > Standby timer or if the delay selected is less than 30 seconds - In self-portrait mode - In U or 6 mode - During display zoom - While the camera is connected to another device via HDMI or USB • Selecting Disable increases the drain on the battery. Slot Empty Release Lock G button ➜ B (setup menu) Selecting Enable release allows the shutter to be released when no memory card is inserted, although no pictures will be recorded (they will however be displayed in demo mode). If Release locked is selected, the shutter-release button is only enabled when a memory card is inserted in the camera. Menu Guide > B The Setup Menu 325