Nintendo GAMECUBE Instruction Booklet - Page 8

2 • SYSTEM SETUP Connecting to a MONO TV or VCR (No Stereo Sound) TV or VCR Inputs VIDEO IN AUDIO IN (Yellow) (White) 2 • SYSTEM SETUP Connecting to a TV without AV Inputs Using a RF Switch and RF Modulator (Sold separately, see back cover for purchasing information.) TV Input ANTENNA IN To console ANALOG AV OUT "Y" Adapter (optional) (Not included - purchase from an electronics supply store.) Video Audio (Yellow) Left (White) Audio Right (Red) Stereo AV Cable Using the "Y" Adapter is optional. You may plug either the red or white audio plug directly into the "AUDIO IN" connector on your TV or VCR, although some sound will be absent during game play. Leave the unused plug unconnected. When making the above connections, make sure to plug the Audio/Video plugs from the Stereo AV Cable into the "IN" or "INPUT" connectors on your TV or VCR (Do not use connections labeled "OUT" or "OUTPUT"). NOTE: For the game image to appear on the TV when using the Stereo AV Cable, you must select the Audio/Video input channel ("input select") on the TV or VCR that the cable is plugged into. Accessing input select is different for each model of TV or VCR. See page 12 for more information on input select. You can also find more information about input select on our web site at: www.nintendo.com/consumer/inputselects.html After completing the connections as shown, please turn to page 12. 10 RF Modulator To console ANALOG AV OUT RF Switch Channel 3/4 Switch Existing Cable TV Connection NOTE: All Nintendo brand RF Switches (NES, SNES and N64) and RF Modulators (N64) will work with the Nintendo GameCube. After completing the connections as shown, please turn to page 12. 11